Introduction:          

Our factory is dredger for dredging, pumping sand dredging ship engineering development projects, pre reamer to ensure dredging concentration, long-distance transport, in the effective working time of dredging river water in high sediment concentration. We will according to the requirements of customers customized dredger.          

Cutter suction dredger is a combination of mechanical and hydraulic dredger, which can guarantee the quality of water (i.e. digging deep seabed mining under water after the smoothness and dredging depth), must be installed in the hull of the steel pile and steel pile or three cable landing gear positioning device to position of ship the ship's movement. Transverse swing of the hull, the connection in the dredging on the bridge reamer two sliding anchor lateral swing. Dredging depth which is arranged on a bridge or winch on the depth of the sensor response to the bridge by lowering the driver to control the operation. The underwater cutter rotation after breaking ground, the mud pump in the centrifugal water suction pipe at the rear end of the entrance, the suction mouth has a certain vacuum cutter rotary stirring loose sediment with water suction tube in the mud, mud and mud pump through the pipe after the mud conveying to the specified mud in the area. If the distance is far away from the ship in the hull of the tank through the relay transmission. Therefore, through the above work, the water can be excavated, transported, discharged to the designated dumping mud area at a time to complete.